PLANTIT pH Meter

Learn More

ETI pH Meter

Learn More

Essentials EC Meter Convenient and easy to use meters specially designed for testing the EC level of nutrient solutions. Just dip the sensor into test solution, stir and wait, and then read a stable reading in about 20 seconds. The Essentials EC meters, are truly the most rugged glass type EC testers around. They are drop-shock resistant, temperature compensating and easy to calibrate. The units are also water resistant, allowing easy washing. Even if the meter is accidentally dropped into the water, it will remain afloat so as to enable immediate retrieval without damaging the electronics. The meters cost less per sample than competing high quality testers. Meters have about 1-3 year lifespan depending on rate of sampling. (Units are good for a minimum of 365 accurate EC tests). The meters have an energy saving feature that shuts off the tester when it is not in use. To ensure accurate reading at all times, the unit displays a low battery symbol to alert the user to change batteries before it degrades the accuracy of important readings. Learn More

Essentials EC Pro Meter - 100% Waterproof The ESSENTIALS pH Pro & EC Pro meters are professional quality, reliable and available with replacement probes. They have a large screen to view results and are very easy to use. They have screw calibration and come with a built in small screw driver. A feature that many customers have been asking us for. The meters have a lifespan of about 1 to 3 years depending on rate of sampling. (Units are good for 365 accurate tests.) These meters are some of the most robust in the market. They are fully waterproof and drop proof. To really push it we released the seal and held the meter under water for several minutes to allow water to enter the unit. The unit stopped working as expected. We then removed the board which is designed to slide out, dried it and it was back to normal working condition! So there is no need to worry if you accidentally drop it into your nutrient tank. Now thats a robust meter! Learn More

Essentials pH Meter Convenient and easy-to-use meters specially designed for testing the pH & CF/ EC level of nutrient solutions. Just dip the sensor into test solution, stir and wait, then read a stable reading in about 20 seconds. The Essentials pH & CF/EC meters, are truly the most rugged glass type pH & CF/EC testers around. They are drop-shock resistant, temperature compensating and easy to calibrate. The units are also water resistant, allowing easy washing. Even if the meter is accidentally dropped into the water, it will remain afloat so as to enable immediate retrieval without damaging the electronics. The meters cost less per sample than competing high quality testers. Meters have about 1-3 year lifespan depending on rate of sampling. (Units are good for a minimum of 365 accurate pH tests). Learn More

Essentials Trident Replacement Probe Set/Housing Replacement Probe Set/Housing for Essentials Trident Meter. The all-in-one conductivity, pH and temperature meter is designed to make nutrient measurement quick and easy. It can be used as a stirrer and makes it easier to take readings in deep tanks. - Accurate and rapid conductivity, pH and temperature measurement - Nutrient strength in EC, CF or PPM - Easy push button calibration - Auto turn-off to preserve batteries - Supplied with long life AA batteries - Low battery indicator - Temperature compensation - Replaceable probe housing Learn More

Bluelab EC & ppm Pens

The ultimate handy solution for measuring conductivity (EC or ppm) and temperature!

The Bluelab EC or ppm Pen simply tells you that your plants have the right amount of nutrient in your solution and lets you know if adjustments are needed. To feed plants well, we need to know what we're feeding them. Start with a quality nutrient.

Measuring the conductivity every day is the best way to avoid over-diluting or over-concentrating your nutrient solution. Completely change the reservoir solution every 7 days. Top up the nutrient level between changes - so your plants always have the right amount of food.

The Bluelab EC or ppm Pen also measures the temperature of the solution, as root health is vital to the success of a crop. Temperature affects the growth rate and structure of a plant so a solution temperature of 18 - 22ËšC or 65 - 72ËšF is recommended.

To make sure the plants can get at the food, you need to measure the pH of the solution. Check out our handy Bluelab pH Pen so you have every tool required to manage your nutrient solution.

Now isn't that Handy!

Learn More

Bluelab Truncheon Nutrient Meter

The World’s favorite conductivity meter. Simply brilliant, brilliantly simple!

It is essential when growing with a hydroponic solution to KNOW what the strength of the solution is before feeding your plants AND while they are growing. If the conductivity reading is too low, your plants may not be getting enough nutrients. If the conductivity reading is too high, plants can dehydrate.

Understanding the conductivity of the nutrient solution takes the guesswork out of feeding plants. It will also save you money! Using the Bluelab Truncheon® Nutrient Meter is the fastest and easiest way to measure the conductivity!

To take a reading of your solution - simply place the probe head into the solution and the reading is indicated by the flashing lights. Calibration of the Truncheon® Nutrient Meter is not required.

The Bluelab French-English Truncheon® Nutrient Meter is available with Canadian-French / English labels and instructions.

Meter length: 40.7cm or 16 1/32 in.

Learn More