Extraction Fans

S&P TD350/125 Fan- 350m3/hr - These fans are very quiet!

Quiet inline duct fans.

These exhaust fans are quiet, made from tough plastic construction, and their unique design means the motor and impeller assembly can be removed and replaced without dismantling the adjacent ducting or support work.

Learn More

RAM Inline Duct Fan - 250mm - 1088m³/hr

An inline duct fan which has been optimised design for high pressure and quiet air movement. The RAM Inline Duct fan is supplied with a mounting bracket and IEC connector socket.

Learn More

RAM Mixed-Flow Inline Fan - 150mm - 517m³/hr

A switched two speed mixed-flow inline fan which is optimised design for high pressure and quiet air movement. The RAM Mixed-Flow Inline fan is supplied with a mounting bracket and IEC connector lead.

Learn More

RVK High Quality Extractor Fans - The SystemAir RVK range of fans are made in Germany by LTI.

These German made extraction fans are low wattage, high output and designed to handle both low air volume hobby use and high air volume commercial use. These fans can be run 24hours, 7days, 356 days a year without any problems. In fact, this is what they have been designed for.

RVK extraction motors are very quiet. If the noise from the airflow is a problem, purchase one of our silencers and place at one end with a carbon filter on the other end.

RVK Fans:
* Speed-controllable (using various speed controller)
* Integral thermal contacts with electrical reset
* Can be installed in any position
* Maintenance-free and reliable
* Manufactured from fibreglass reinforced plastic

The RVK brackets (supplied in box) allow for easy instillation to the floor, wall or ceiling, and removal.

Learn More

RAM Mixed-Flow Inline Fan - 200mm - 840m³/hr

A switched two speed mixed-flow inline fan which is optimised design for high pressure and quiet air movement. The RAM Mixed-Flow Inline fan is supplied with a mounting bracket and IEC connector lead.

Learn More

RVK High Quality Extractor Fans - The SystemAir RVK range of fans are made in Germany by LTI.

These German made extraction fans are low wattage, high output and designed to handle both low air volume hobby use and high air volume commercial use. These fans can be run 24hours, 7days, 356 days a year without any problems. In fact, this is what they have been designed for.

RVK extraction motors are very quiet. If the noise from the airflow is a problem, purchase one of our silencers and place at one end with a carbon filter on the other end.

RVK Fans:
* Speed-controllable (using various speed controller)
* Integral thermal contacts with electrical reset
* Can be installed in any position
* Maintenance-free and reliable
* Manufactured from fibreglass reinforced plastic

The RVK brackets (supplied in box) allow for easy instillation to the floor, wall or ceiling, and removal.

Learn More

Hyper Fan - 8" HyperFan - 1206m3

Similar to the technology of an airplane propeller, the Laminar Flow Fan Blade & Stator creates optimal airflow for cooling your grow room and equipment.

The Hyperfan produces the highest CFM's per watt of any fan in the industry, and has exceptional static pressure performance. The next generation multi phase motor allows the Hyper Fan to not only be extremely quiet, but energy efficient as well (uses half the electricity required by other brands). Large ball bearings reduce the wear and tear, increasing the life span of the unit.

The included speed controller can adjust fan speed from 30% to 100%.

It is detachable from the fan and independent from the power cord. Lightweight aluminum housing is one-third the weight of comparable steel bodied fans. They are compact and easy to install. Universal mounting positions – can be mounted in any position allowing maximum flexibility during installation.

Heavy-duty 6/8/10 mm bearings, versus commonly used 4 mm bearings, ensure smoother operation and increased longevity of the fan. 5 year warranty.

 

Learn More

The three-dimensional curved blades efficiently direct air through the tube body where a “Stator” reduces turbulence, ensuring airflow is as smooth as possible. What this means to you and me is a reduction in energy loss and subsequently a comparatively cheap and silent fan to run over its lifetime. These fans really do move a huge amount of air! To calculate how big a fan you will require: Simply multiply the length x width x height of your growroom in mtrs which will give you the cubic capacity of your room ..and then multiply that value by either 30 or 60 which is the minimum and maximum air changes required per hour for optimum ventilation in your growroom. Learn More

594m3/hr Learn More